Views: 0 Author: Site Editor Publish Time: 2026-08-10 Origin: Site
Dongguan Fuyuan Electronic Co., Ltd. has confirmed its participation in the 2026 GIS Global Innovation Show & Global Innovation Summit in Hong Kong, running from 25 to 27 August at AsiaWorld-Expo. The company will exhibit its full range of battery chargers, power adapters and LED drivers in Hall 5 and Hall 7 at booth A-2-117, with engineering and export sales staff on site for technical and commercial discussions. Machine builders and trading partners looking for a robot battery charger platform can review the range in person rather than through a catalogue.
The display focuses on chargers for mobile intelligent equipment: mower robots, pool-cleaning robots, drones and humanoid robots, alongside standard and customized power products including lithium-ion chargers, LiFePO4 chargers, lead-acid chargers and GaN high-efficiency models. Those platforms address the charging requirements of industrial AGVs, campus patrol robots, food-service delivery robots, commercial disinfection robots and educational companion robots.
Show information:
Event: 2026 GIS Global Innovation Show & Global Innovation Summit, Hong Kong.
Dates: 25 August (Tuesday) to 27 August 2026 (Thursday).
Venue: AsiaWorld-Expo, Hong Kong, Hall 5 and Hall 7.
Fuyuan booth: A-2-117.
Business line: 0769-86595039.
Tip: Bring the battery pack you actually use to a booth visit. Charger selection turns on chemistry, nominal voltage, maximum charge current and cell balancing behaviour, and all four are easier to discuss with the pack in hand.
Overseas equipment makers tend to arrive with the same four problems: chargers that cannot handle weather exposure on outdoor machines, incompatible charging algorithms across different battery chemistries, weak electromagnetic immunity in industrial settings, and approval procedures that stretch a launch timeline across several countries. Fuyuan has developed its catalogue around those constraints, supported by a CNAS-level in-house EMC laboratory and the two production bases in Dongguan and Hunan.
Mower robots and pool-cleaning robots work in direct sun, standing water and dust. High-sealing charger models are built for that duty, using sealed and potted construction to keep moisture and dust out of the electronics. For cold-weather operation, the modified flame-retardant housings start charging at −20°C, and off-road designs move to IP65 dust and moisture protection.
Drones and humanoid robots are weight-sensitive, so charger design becomes a packaging problem as much as an electrical one. GaN topology raises conversion efficiency and reduces the size of the power stage, so the charger adds less mass to the platform it serves.
Warehouse AGVs and industrial handling robots often run around variable-frequency drives and other heavy equipment, where mains-borne noise can disturb a charger's control loop. Industrial-grade LiFePO4 charger designs use multi-stage filtering to hold charging parameters steady in that environment, which reduces unplanned downtime caused by power faults.
Tip: Ask for EMC test reports from an in-house laboratory and the corresponding third-party certificates. Together they show that a design performs both on the bench and in an accredited test house.
Hong Kong works as a meeting point for Chinese power-supply manufacturing and overseas demand, and compliance is usually the first item on the agenda. Fuyuan's charger range already holds safety approvals for major markets — CCC, UL, UKCA, PSE and SAA among them — so machine builders can cover domestic and export requirements without running a separate approval project for the power supply.
Beyond the certificates, the support chain runs from BMS protocol adaptation and enclosure customization through rapid sampling to stable volume delivery. Fuyuan was founded in 2005, is a National High-Tech Enterprise and a Guangdong SRDI SME, and operates 108,000 m² of production space with 450 employees; chargers ship after 4–8 hours of full-load burn-in and 100% factory inspection, with a 3-year warranty and MTBF of at least 30,000 hours.
Tip: Map your target markets to the certification list before you discuss price. A compliant charger that ships on schedule costs less than a cheaper one that is held at customs.
For three days in August, the Hong Kong show puts charger engineering, compliance and delivery capability in one place, and Fuyuan's booth A-2-117 will be staffed by the engineers who handle battery matching, customization and overseas certification questions. For reliable products and expert support, Fuyuan Electronic offers high-quality robot battery chargers engineered for continuous duty, from 60W units to 10KW multi-output systems.
A: The 2026 GIS Global Innovation Show & Global Innovation Summit runs from 25 to 27 August 2026 at AsiaWorld-Expo in Hong Kong, in Hall 5 and Hall 7.
A: Booth A-2-117. Research engineers and the overseas sales team will be present for the full three days of the show.
A: Battery matching, charge profile design, BMS protocol adaptation, enclosure and connector customization, ingress protection levels, certification for target markets, and volume supply arrangements.
A: The range carries multi-market approvals including CCC, UL, UKCA, PSE and SAA depending on the model, alongside the wider portfolio coverage of UL, cUL, ETL, FCC, TUV-GS, CE (EMC and LVD), CB, KC, KCC, SAA, RCM, NOM, BIS, RoHS and REACH.
A: Yes. Contact the sales team in advance with your battery specification and target markets so the engineers can prepare a charger selection reference for your visit.
